Attaching LCD Bracket & LCD

Remove the LCD bracket from the base case. Loosen the long steel screw by twisting the knob until it releases the two sides of the hinge. Open the hinge and grip it around the tube. Make sure the give yourself room between the handle and the collar.

(NOTE : You can attach the hinge to the next higher tube, but you will not be able to elevate or lower that tube, until you have removed the hinge.) Loosen the camlock in the back to reposition the angle of the bracket. Find the position that works for you, and relock the camlock.





Next loosen the sliders. The sliders will allow for the lcd. Insert the LCD. Once you have the position you like, reposition the sliders to make contact with the lcd. When they are snug, tighten the sliders. They will secure the LCD so it will not fall out.